Uber Mover 106CP
Single wheel motorized concrete wheelbarrow

 The Haulz-All Uber Mover 106CP is a niche machine targeted primarily toward concrete and fence contractors.  It has all of the same features at the standard 106C, but is supplied with a patented pour-nose tub for accurately pouring concrete or stone.  It has enough power to move up to 400 pounds on a hard level surface, 300 pounds up a 2:1 grade, and is perfect for filling post holes, silo tubes or narrow trenches. (for more power, see Uber Mover 206CP)

Why would a concrete contractor invest in a 106CP?  Speed, productivity and safety at a cost that is far less than a concrete buggy.  Obviously the 106CP will not carry nearly as much as a gas-powered Georgia Buggy, but many jobs are too small for such a large machine anyway.  Furthermore, with the pour nose spout, you do not need a second laborer to guide the mud into the hole or trench.  Your laborers are free to move concrete.  Think of this way.  If the pour is 10 yards, (one truck load) typically you get 55 to 60 minutes to unload the truck.  Using an Uber Mover 106CP will typically allow you to use one less laborer on the job.

The pour tub is the thickest poly tub available, as are the handles and legs.  The drive system is a double reduction worm and worm wheel sealed gearbox coupled to a high- torque DC motor and brake.  It has a design life of more that 2000 hours. The variable speed throttle will provide forward and reverse speed from 0.5 mph up to 3.6 mph. And as with all Haulz-All equipment, regenerative braking is included.  Concrete contractors can expect a battery range of 2-4 hours depending on how hilly the job is, and how far from the truck you are pouring.  Recharge for a completely discharged set of batteries is 4-6 hours, so we suggest at least one machine per truck load of concrete to be poured.